Table of Contents
Advertisement
SET
0
&J-CODE
SET
0
MENU
Normal Screen
TIMER
ON/OFF
TIMER
Please be sure to check that the start and end times of two different programmes do not overlap, as the remote control has
l
been designed to accept the basic individual G-CODE number only. If the recording periods of two programmes overlap,
the beginning of the second programme will not be recorded.
programme number you wish to cancel with A/Y and press
Setting the Programme Number In Step 5
When using G-CODE for the first
highlighted white. Set it to be the same as the PR number to which your broadcasting channel is set into.
For instance if you can view CH 47 on programme (PR) 47, set the On screen PR number to 47.
You need to set this only once.
l
If the channels are retuned you need to set the PR numbers again.
l
Input programme No. here
II the wrong programme has been recorded, for future recordings change the PR number (i, e. Step 0) to the same preset
l
channel position number as on the VCR. (Refer to
To programme additional timer settings, press SET and
repeat steps @ through 0.
:
return to the normal screen, press
To
set the VCR for automatic timer recording, press
To
TIMER ON/OFF and ensure the "13" indication lights on
the VCR display.
CLEAR. (See Cancelling Timer Programmes
time the Programme number (PR) on the screen shows two dashes and is
Manual Tuning
Programming the Timer with
on page 14 )
MENU.
on page 30.)
27
Advertisement
Table of Contents
