Setting the Clock
When you use the VCR for the first time or after a power
failure of more than 60 minutes the clock will be reset.
Apply power to the unit to power on (see page 5,
item 3) and press MENU, Then perform the following
procedure.
PREPARATION
Select the video channel on your TV.
l
And turn on the VCR. (See page 5, item 3.)
Initial Setting of Clock
C Changing the Clock Setting
12-h
l
If 12H mode was selected, then set the AM/PM indicator.
l
control, and then press . . (First set the 'day' digits and then
the 'month'. If there is only one 'day' or one 'month' digit,
Follow steps
through @ above and step