Table of Contents
Advertisement
Editing from a Camcorder to Your VCR
Editing from your Camcorder is extremely easy using your VCR with a linear tape counter, etc. The connection
diagram below is for a guideline only. Refer to your Camcorder Operation Manual for precise connection
information.
Specifications
Format:
Video recording system:
Video signal system:
Hi-Fi audio recording system:
Maximum playing time:
Tape width:
Tape speed:
Antenna:
Reception channels:
RF output signal:
Power requirement:
Power consumption:
Operating temperature:
Storage temperature:
Video input:
output:
Audio input: (phono type)
output: (phono type)
Hi-Fi audio:
Dimensions:
Weight:
Supplied accessories:
VHS PAL/NTSC standard
Two rotary heads, helical scan
PAL/NTSC colour or monochrome (CCIR system B/G) signal
Deep-layer recording system conforming to stereo Hi-Fi VHS standard
720 minutes max. (EP mode) with E-240 tape (PAL)
480 minutes max. with T-160 tape (NTSC)
12.7 mm
PAL : 23,39 mm/sec. (SP), 11.70 mm/sec. (LP), 7.80 mm/sec. (EP)
NTSC: 33.35 mm/sec. (SP), 16.67 mm/sec. (LP: Playback only),
11.12 mm/sec. (EP)
75 Ohm unbalanced
VHF channel 0 to 12, UHF channel 28 to 69
UHF channel 28 to UHF channel 69 (preset to UHF channel 37)
AC 240 V, 50/60 Hz
14 W (approx,)
5DC to 40°C
— 20°C to 55°C
1.0 Vp-p, 75 Ohm
1.0 Vp-p, 75 Ohm
Line: -8dBs, 47 kohm min.
Line: -8dBs (approx.), 1 kohm max.
Dynamic range: Typically 85 dB
Frequency response: 20 Hz-20 KHz
Wow and flutter: less than 0.005% Wrm
430 (W) X 92 (H) X 227 (D) mm
2.8
kg
R6 (AA, UM/SUM-3) battery x2
75-ohm coaxial cable, operation manual, remote control unit
Design and specifications are subject to change without notice.
34
Advertisement
Table of Contents
