A D V A N Ced Opera T I On; Audio And Your Vcr (Hifi Vcr's Only) - Sharp VC-MH741SM Operation Manual

Hide thumbs Also See for VC-MH741SM:
Table of Contents

Advertisement

741 eng.book Page 16 Tuesday, April 27, 1999 11:35 AM

A D V A N CED OPERA T I ON

A U D I O A N D Y OU R V CR
H I - FI ST EREO SOU N D
Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a
scart lead, or audio equipment connected with audio phono leads. The VCR is normally set
so that stereo sound is possible. The sound output from the VCR is controlled by the
A U D I O OU T
use the
Press
appear on the VCR display.
Press
appear on the VCR display.
Press
will disappear from the VCR display.
Pressing
appear on the VCR display.
N I CA M H i- Fi ST EREO SOU N D
Your VCR can receive and record programmes broadcast in NICAM or IGR sound (the factory
pre-set condition for NICAM is AUTO). NICAM or IGR sound may not be stereo, this depends
on the programme being received.
Audio is automatically recorded in two different ways:
(i) Hi-Fi: Using specialised rotary heads, two audio signals are recorded on to the tape. These
will be stereo, mono or bilingual depending on the sound being received.
(ii) Normal: A mono recording is also made on the conventional analogue audio track.
1.
Press
screen.
2.
Press [
3.
Press
4.
Press
5.
Press
6.
Press
NOTES:
If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R
will not appear on the display.
lf the sound contains 'crackling' or 'popping' noises the sound quality may be
improved by adjusting the tracking using CHANNEL
If the poor quality is for a long period the VCR will automatically select the mono track
and the sound will be in mono.
Not all TV transmitters provide NICAM or IGR sound. In this case the VCR automatically
switches to receive the mono signal.
NICAM sound may not be stereo.
Downloaded from:
http://www.usersmanualguide.com/
button on the remote control. If you wish to change the sound output you can
A U D I O OU T
button as follows:
A U D I O OU T
once. The LEFT audio channel will be sent to BOTH speakers.
A U D I O OU T
twice. The RIGHT audio channel will be sent to BOTH speakers.
A U D I O OU T
three times. The MONO track will be sent to BOTH speakers.
A U D I O OU T
a fourth time, normal Hi-Fi stereo sound will be heard.
M EN U
to display the main menu on the
/
] to select MODE.
SET
. NICAM will be selected.
[
/
] to select OFF.
SET
, to return to the menu screen.
M EN U
, to exit to normal screen.
( H iFi V CR'S ON LY )
N I CAM
AU T O
CO L OUR
AU T O
/
.
GB-16
L
will
R
will
L
and
R
L
and
R
will
O F F
P A L ME S E CAM

Advertisement

Table of Contents
loading

Table of Contents