Sharp VC-H670X Operation Manual page 29

[Tape Speed]
.
[Timer review]
ATE PR START ST
TIMER
If the video cassette runs out before recording all the programmes, your VCR WIII stop, eject the cassette, and shut off
l
automatically.
If power is interrupted for more than 60 minutes (power failure, etc.), all timer settings will be cancelled.
l
If TIMER ON/OFF is pressed when there is no cassette loaded, "17'" flashes for 5 seconds, indicating that timer recording is
l
not possible.
If TIMER ON/OFF is pressed while a cassette with an uncovered erasure protection hole is loaded, "B" flashes and the
l
cassette is ejected
When 'Yl" is lit, regular VCR operation, clock setting and settrngicancellingiconfirming
l
reaular VCR ooeration. clock setting and settinq/cancelling/confirming
During timer recording, the timer cannot be set.
l
If no buttons are pressed within one minute while setting a timer programme position, the mode automatically returns to the
l
previous mode.
If the same time is input for the start time and the stop time, the timer setting will be cancelled
l
to 24H mode, "AM/
Timer Recording (JU
repeat steps @ through 0.
To return to the normal screen, press MENU.
TIMER ON/OFF and ensure the "Q" indicator lights on
the VCR display.
Recording with the Timer
e numeric
timer positions are not possible. For
timer positions, press TIMER ON/OFF to disengage
29