Table of Contents
Advertisement
VCR Display
When DISPLAY is pressed, the display
the clock time is set and displayed in the 12.hour system.)
Example: [TAPE COUNTER/CHANNEL]
During timer recording or Simple Recording Timer, the display shows the record finish time. When
l
(If the "m" indicator on the VCR display is lit, cancel the timer standby mode by pressing
the power.)
Example, [COUNTER]
Example:
[RECORD FINISH TIME]
During Simple Recording Timer recording, "0 lights
l
Counter Clear
Make sure the counter is displayed, then
The counter will reset to "O:OO.OO" when the tape is rewound completely
l
changes in the following way. (However, the following is the case when
Example, [TAPE REMAINING/CHANNEL]
Example:
[OPERATING MODE/CHANNEL]
[REMAINING TIME]
<
press CLEAR on the remote control.
is pressed, the
DISPLAY
and then turn on
TIMER ON/OFF
Example: [PRESENT TIME]
37
Advertisement
Table of Contents
