Pin Tucking - Kenmore 385.19110 Owner's Manual

Quilting
Machine setting
_i_ Pattern
_2_LED display
_3_Foot
_4_ Quilting bar
01
I
+
A: Zigzag foot
Loosen the quilting bar screw on the back of the foot
holder and insert the quilting bar into the hole. Set the
quilting bar at the desired position and tighten the
screw to secure it.
Sew tracing the previous seam with the quilting bar t
keep constant seam spacing.
_i_ Quilting bar screw
_2_
Hole
_3_ Quilting bar
_4_ Seam spacing
01
I
I
+
Pin Tucking
Machine setting
_i_ Pattern
_2_LED display
_3_Foot
02
I
G: Blind hem foot
Fold the fabric with wrong side together.
Position the fabric so that the needle pierces 0.1-0.2
cm (1/16")inside of the folded edge, and lower the
foot.
Turn the guide screw and move the guide next to the
folded edge. Sew guiding the folded edge along the
guide.
Open the fabric and press the tucks to one side.
_i_ Guide screw
_2_ Guide
_3_Folded edge
02
I
I
,_,,--,}