Kenmore 385.19110 Owner's Manual page 40

Appliqu_
Machine setting
_i) Pattern
_2) LED display
_3) Foot F: Satin stitch foot
Baste or glue applique pieces on the fabric.
Stitch around the applique making sure the needle
falls along the outer edge of the applique.
When turning corners, lower the needle down into the
outer edge of the appliqu6, and raise the presser foot
to pivot the fabric.
Scallop
_i_ Pattern
_2) LED displ_
_3) Foot
Sew on the right sid ic along the edge leaving
a 1 cm (3/8") allowance.
After sewing, trim the allowance close to the stitching
taking care not to cut the thread.
f
Patchwork
Machine setting
0) Pattern
_2) LED display
_3) Foot
34 38
F: Satin stitch foot
Seam two layers of the fabric with right side together.
Open the fabric flat and sew the pattern over the
seam line on the right side of the fabric.
34 38
1