Yamaha 2008 YW50X Service Manual page 212

O.EOK.°O SW.TO.ES IE'EC I I
JJoo r,
" ~ x l " - -
YP N
CHECKING S W I T C H E S
C H E C K I N G STEPS
Using pocket tester, check switches for conti-
n u i t y b e t w e e n t h e i r t e r m i n a l s to d e t e r m i n e
w h e t h e r t h e y are correctly connected.
Replace the switch c o m p o n e n t if any of the
c o m b i n a t i o n s does not produce the correct
reading.
I ~ 1 Pocket tester:
YU-03112
NOTE:
• Turn the switch to the
" O N " , " O F F "
positions
several times.
• A d j u s t the pocket tester to correct
" 0 "
posi-
tion before checking switches.
• Set the pocket tester selector to
" x l ' E 2 .
X",•
Br R
OFF
ON O - - O
"O"
S W I T C H C O N N E C T I O N A S S H O W N IN THIS
M A N U A L
This manual contains connection charts, like
the one s h o w n on the left, s h o w i n g the termi-
nal c o n n e c t i o n s of s w i t c h e s (e.g. the main
switch, handlebar switch, brake switch, light-
ing switch etc.)
The column on the extreme left indicates the
different switch positions, the top line ind icates
the colors of the leads connected to the termi-
nals on the switch.
" 0 ~ 0 "
indicates terminals between w h i c h
there is c o n t i n u i t y , i.e. a closed circuit, in the
given switch position.
In this chart:
" B r
and R" have c o n t i n u i t y w i t h the switch in
the
" O N "
position.
7-4