Yamaha 2008 YW50X Service Manual page 112

CABLE C°EOK.°O A ° O " U B . . O A T . ° O . " E V E . S " U B . . O A T . ° O " ' " S P ' ' " ' '
C E N T E R S T A N D LUBRICATING A D J
I I ~ 1
E A S 0 0 1 7 0
CABLE C H E C K I N G A N D L U B R I C A T I N G
The f o l l o w i n g
procedure
applies to all of the
cable sheaths and cables.
r!~VAVL, W --'t~ I I ~ [¢-!
D a m a g e d cable sheaths m a y cause the cable
to corrode and interfere w i t h its m o v e m e n t .
Replace d a m a g e d cable sheaths and cables as
soon as possible.
.
.
Check:
• cable sheath
Damage --> Replace.
Check:
• cable operation
Rough m o v e m e n t --> Lubricate.
Recommended lubricant t
Engine oil or a suitable cable lubri
ca nt
NOTE:
Hold the cable end u p r i g h t and pour a f e w
drops of lubricant into the cable sheath or use
a suitable lubricating device.
E A S 0 0 1 7 1
LEVERS L U B R I C A T I N G
Lubricate the pivoting point and metal-to-metal
m o v i n g parts of the levers.
Recommended lubricant
Lithium soap base grease
E A S 0 0 1 7 3
C E N T E R S T A N D L U B R I C A T I N G
Lubricate the pivoting point and metal-to-metal
m o v i n g parts of the centerstand.
Recommended lubricant
Lithium soap base grease
3-23