Recommended Cleaning Tips; Deck And Belt Replacement - Matrix T7xi Owner's Manual

RECOMMENDED CLEANING TIPS

Preventative maintenance and daily cleaning will prolong the
life and look of your equipment.
A Use a soft, clean cotton cloth. DO NOT use paper towels to
clean surfaces on the treadmill. Paper towels are abrasive
and can damage surfaces.
B Use a mild soap and damp cloth. DO NOT use ammonia
based cleaner or alcohol. This will cause discoloring of the
aluminum and plastics it comes into contact with.
C Do not pour water or cleaning solutions on any surface.
This could cause electrocution.
D Wipe the console, heart rate grip, handles and side rails
after each use.
E Brush away any wax deposits from the deck and belt area.
This is a common occurrence until the wax is worked into
the belt material.
F Be sure to remove any obstructions from the path of the
elevation wheels including power cords.
G For cleaning 7xe and 7xi displays, use distilled water in an
atomizer spray bottle. Spray distilled water onto soft, clean,
dry cloth and wipe display until clean and dry. For very dirty
displays, adding vinegar is recommended.
CAUTION: Be sure to have proper assistance to install
and move the unit in order to avoid injury or damage to the
treadmill.
26

DECK AND BELT REPLACEMENT

One of the most common wear and tear items on a treadmill
is the deck and belt combination. If these two items are
not properly maintained they can cause damage to other
components. This product has been provided with the most
advanced maintenance free lubricating system on the market.
WARNING: Do not run the treadmill while cleaning the belt
and deck. This can cause serious injury and can damage the
machine.
Maintain the belt and deck by wiping the sides of the belt and
deck with a clean cloth. The user can also wipe under the belt
2 inches (~51mm) on both sides removing any dust or debris.
The deck can be flipped and reinstalled or replaced by an
authorized service technician. Please contact Matrix Fitness
Systems for more information.
WARNING
To remove power from the treadmill, the power cord must
be disconnected from the wall outlet.