Kärcher ICC 1 S D Service Manual page 54

Basic Settings and Service Procedures
Impeller fan (continued)
1 Retaining bolt
2 Impeller fan
54
1 2
Changing impeller fan (continued)
–
–
–
–
–
–
–
–
–
–
Deflect steering all the way to the left.
Remove hydraulic lines from steering
cylinder.
Detach accelerator cable at side panel (see
page 36).
Slide out impeller fan front panel sideways
between fuel tank and axle.
Remove center bolt and washer (1) from
impeller fan (2).
Pull off impeller fan (2) toward the front.
Grease impeller shaft.
Install new impeller fan on shaft. Install
retaining bolt and washer (1), and tighten.
Assemble all components in reverse order
of disassembly.
Ensure proper seating of seal between
vacuum channel and debris container.
ICC 1 S D