Basic Settings and Service Procedures
Sweeping Mechanism – Warning buzzer, debris container
Opening side console
Bowden cable, detached
Adjusting warning buzzer switch
36
Adjusting warning buzzer switch
–
Pull knobs off control levers (2, 3).
–
Remove panel mounting screws (4).
–
Detach Bowden cable at injection pump (see
page 28).
–
Lift cover panel (5).
–
Unscrew union nut (7).
–
Detach Bowden cable (8).
1
Lever, coarse dirt flap
2
Lever, side brushes and vacuum intake
3
Lever, debris container
4
Panel mounting screws (4x)
5
Cover panel
6
Manual throttle
7
Union nut
8
Bowden cable
9
Switch, warning buzzer (S18)
–
Set lever (3) to "Neutral" position.
–
Turn switch clockwise until (9) switching
noise is heard.
–
Turn switch (9) counter-clockwise one-half
turn.
Note:
Due to confined working space, removal or
rotation of hydraulic hoses on control block
may be required.
ICC 1 S D