Important Safety Instructions - ELNA 2600 Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

Your Elna 2600/2800 series sewing machine is designed and constructed for HOUSEHOLD use only.
DANGER -
To reduce the risk of electric shock:
1. Your sewing machine should never be left unattended plugged in. Always unplug the machine from the
electric outlet immediately after using and before cleaning.
2. Always unplug before replacing light bulb. Replace bulb with same type rated 15 Watts.
3. Do not place or store machine where it can fall or be pulled into a tub or sink. Do not reach for the machine
if it has fallen into water. Unplug immediately.
WARNING -
1. Do not allow machine to be used as a toy. Supervision is necessary when this machine is
used by or near children.
2. Use this sewing machine only for ist intended use as described in this manual. Only use attachments
recommended by the manufacturer as described in this manal.
3. Never operate this machine if it has a damaged cord or plug, is not working properly, has been
dropped or damaged or dropped into water. Return the machine to the nearest authorized dealer or
service center for examination, repair, electrical or maechanical adjustment.
4. The machine is equipped with a special connection cord which, if damaged, must be replaced
by an identical cord. This can be obtained from your dealer.
5. Never operate the sewing machine with any air opening blocked. Keep ventilation openings of the
sewing machine and foot control free from the accumulation of lint, dust and fibers.
6. Never drop or insert any object into any opening.
7. Do not use outdorrs.
8. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
9. To disconnect, turn machine off and remove plug from outlet.
10. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
11. Keep fingers away from all moving parts especiallythe needle.
12. Always use the proper needle plate. The wrong plate can cause the needle to break.
13. Do not use bent needles.
14. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
15. Switch this sewing machine off when making any adjustment in the needle area, such as
threading the needle, changing needle, threading bobbin, changing presser foot, etc.
16. Always unplug this sewing machine from the electrical outlet when removing covers,
lubricating or making any other servicing adjustments mentioned in the instruction manual.
USA only
Your machine comes equipped with a polarized plug (one prong wider than the other). A
polarized plug reduces the risk of electrical shock. This plug is intended to fit into a polarized
outlet. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not modify the plug in any way.
Use only foot control YC-482J or TJC-150 (UL, CSA).
Read all instructions before using this machine.
To reduce the risk of burns, fire, electrical shock, or injury:
SAVE THESE INSTRUCTIONS
2