Super Stretch Stitch; 3-Step Zigzag Stitch - ELNA 2600 Instruction Manual

q 17/15
w

Super Stretch Stitch

e
Machine setting
Stitch:
1
Stitch width:
2
Stitch length:
3
Thread tension: 3 – 7
4
Presser foot:
5
Model 2800:
This stitch is ideal for finishing edges of stretch fabrics. It
seams and finishes the fabric edges simultaneously.
Place the edge of the fabric next to the guide of foot and
sew while guiding the fabric edge along the guide.
Guide
6
CAUTION:
Do not set the stitch width less than 5 when using the
overedge foot C, otherwise the needle may hit the foot
causing the needle to bend or break.
Model 2600:
Place the fabric to leave a 5/8" (1.6 cm) allowance.
Trim the extra allowance after sewing.
3-Step Zigzag
Machine setting
Stitch:
1
Stitch width:
2
Stitch length:
3
Thread tension: 3 – 6
4
Presser foot:
5
This stitch is used to finish a raw edge on synthetics and
other fabrics that tend to pucker.
Place the fabric to leave a 5/8" (1.6 cm) allowance.
Trim the extra allowance after sewing.
It is also used for mending tears.
48
17 (Model 2800)
15 (Model 2600)
5
S.S.
C (Model 2800)
A (Model 2600)
3
3 – 5
0.5 – 1.5
A