Important Safety Instructions - ELNA eXperience 620 Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

T his appliance is no t in t ended f or use by persons (including children) wi t h reduced physical , sensory o r
mental capabilities, or lack of experience and knowledge, unless they have been given supervision o r
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with this sewing machine.
When using an electrical appliance, basic safety precautions should always be followed, including th e
following :
This sewing machine is designed and manufactured for household use only.
Read all instructions before using this sewing machine.
DANGER
1 . An appliance should never be left unattended when plugged in. Always unplug this sewing
machine from the electric outlet immediately after using and before cleaning.
2 . Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated 1 2 Volts,
5 Watts .
WARNING
1 . Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used
by or near children.
2 . Use this appliance only for its intended use as described in this ownerʼs manual.
Use only attachments recommended by the manufacturer as contained in this ownerʼs manual.
3 . Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if
it has been dropped or damaged, or dropped into water.
Return this sewing machine to the nearest authorized dealer or service center for examination,
repair, electrical or mechanical adjustment.
4 . Never operate the appliance with any air opening blocked. Keep ventilation openings of this
sewing machine and foot controller free from accumulation of lint, dust and loose cloth.
5 . Never drop or insert any object into any opening.
6 . Do not use outdoors.
7 . Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
8 . To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.
9 . Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10 . Keep fingers away from all moving parts. Special care is required around the sewing machine
needle and/or cutting blade.
11 . Always use the proper needle plate. The wrong plate can cause the needle to break.
12 . Do not use bent needles.
13 . Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14 . Switch this sewing machine off ("O") when making any adjustment in the needle area, such as
threading the needle, changing the needle, threading the bobbin or changing the presser foot, and
the like.
15 . Always unplug this sewing machine from the electrical outlet when removing covers, lubricating, or
when making any other adjustments mentioned in this ownerʼs manual.
SAVE THESE INSTRUCTIONS
The design and specifications are subject to change without a prior notice.
Please note that on disposal, this product must be safely recycled in accordance with relevant Nationa l
legislation relating to electrical/electronic products. If in doubt please contact your retailer for guidance .
(European Union only )
U S A onl y
Y our machine comes equipped with a polarized plug (one prong wider than the other). A polarized plu g
reduces the risk of electrical shock. This plug is intended to fit into a polarized outlet. If the plug does no t
fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install th e
proper outlet. Do not modify the plug in any wa y .
Use only foot control model 21371 for this sewing machine (UL, CSA)
—
To reduce the risk of electric shock:
—
To reduce the risk of burns, fire, electric shock, or injury to persons:
1
.