Tv Settings - Kathrein UFS 902 Operating Manual

TV SETTINGS

Use the
When doing this, refer to the operating instructions for your TV set!
Video Output via
Select here the connection on the receiver to which you have connected your television.
Either
SCART
TV aspect ratio
Here you select the TV's picture format. Either
- 4:3 or
- 16:9
Picture format
Here you select the type of screen display,
depending on the setting of your TV format:
• Pan & Scan
• Letterbox
• Automatically (only if the "16:9" TV format
was selected)
• Always 16:9 (only if the "16:9" TV format was
selected)
TV-Scart-Output
Select the type of video signal at the TV Scart
socket here. Select the signal that your TV set
can process.
- FBAS – Color Video Baseband Signal
- RGB – Red/Green/Blue signal or
- Y/C – S-Video
chrominance)
64
buttons here to select the settings for your TV set.
signal (luminance/
SETTINGS
or
HDMI/YUV format
Select here the video resolution that is to be used
on your TV. Either
- 1080i (resolution 1920 x 1080, half-screen
images)
- 576p (resolution 720 x 576, full-screen
images)
- 720p (resolution 1280 x 720, full-screen
images) or
- Automatic
Show 4:3 event
Select here the type of screen display for 4:3
programmes on a 16:9 TV:
- normal (Pillarbox)
- stretched (Fullscreen)
- zoom in (Pan & Scan)
You can also open the settings for "Show 4:3
event" and for "HDMI/YUV Format" when viewing
by pressing the
Audio format via HDMI
Select here the type of audio signal that is to
be output over the HDMI interface. Select the
signal that your TV set can process.
- Decoded PCM
- S/PDIF format
HDMI/YUV
(green) button once.