Table of Contents
Advertisement
Burner/ Grate Installation
4. Secure the electrical bulkhead plate and
gasket to the fi rebox. (2 screws) Attach the
ignition and sensor wires to the module.
Red end to the connector marked by the
red dot, white end to the connector marked
by the white dot
Fig.#2 & Fig.#3
TC30.NG06C 200411-16
Fig. # 2
BULKHEAD PLATE
Fig. # 3
WHITE END TO
WHITE DOT
3
2 SCREWS
RED END TO
MODULE
RED DOT
Advertisement
Table of Contents
