Manually dimmed rear-view mirror
First read and observe the introductory information given on page 49.
Basic setting
›
Pull the lever on the bottom edge of the mirror forward.
Dimming mirror
›
Push the lever on the bottom edge of the mirror backwards.
Additional interior mirror
First read and observe the introductory information given on page 49.
The additional interior mirror allows the driver a wider field of view of the rear
seats.
Adjusting the angle
›
Grip the mirror by the top and bottom edges simultaneously so that you do not
touch the mirror surface.
›
Adjust the mirror in direction of arrow to the desired position.
WARNING
Concentrate fully at all times on your driving! As the driver you are fully re-
sponsible for the operation of your vehicle. Use the additional interior mirror
only to such an extent that you are in full control of your vehicle at any time.
50
Using the system
Fig. 36
Additional interior mirror
Exterior mirrors
First read and observe the introductory information given on page 49.
Adjust the rear mirror before commencing to drive so that there is a clear view to
the rear.
Heating of the external mirror
›
Place the rotary knob into the position
The exterior mirror heater only operates when the engine is running and up to an
outside temperature of +20 °C.
Adjusting the left-hand exterior mirror
›
Place the rotary knob into the position
surface is identical to the movement of the rotary knob.
Adjusting the right-hand exterior mirror
›
Place the rotary knob into the position
surface is identical to the movement of the rotary knob.
WARNING
Convex (curved outward) exterior mirrors increase the field of vision. They
■
do, however, make objects appear smaller in the mirror. These mirrors are
therefore only of limited use for estimating distances to the following vehi-
cles.
Whenever possible use the interior mirror for estimating the distances to
■
the following vehicles.
Fig. 37
Inner part of door: Rotary knob
» Fig.
37.
» Fig.
37. The movement of the mirror
» Fig.
37. The movement of the mirror