Skoda Fabia Owner's Manual page 196

›
Grip the tail lamp assembly and carefully remove it by pulling it back at an angle
with loosening movements. Do not pull the grommet with the cables out of the
bodywork.
›
To re-install the tail light assembly, first of all guide it with the screw
the opening of the bodywork » Fig.
›
Carefully press the tail light assembly into the bodywork so that the bolts
latch with the mounts in the body.
›
Hold the tail light assembly with one hand, and attach and tighten the
nuts » Fig. 161 -  with the other hand.
Replacing the bulbs in the tail lamp assembly
›
To replace the bulb, turn the bulb holder anti-clockwise up to the stop and re-
move it from the housing » Fig. 162.
›
Replace the bulb, insert the holder with the bulb into the housing and turn in a
clockwise direction to the the stop.
Note
For slackening and tightening the plastic nut use a coin or similar object.
194
Do-it-yourself
A
161.
into
B
