Pace 20A Operation & Maintenance Manual page 3

The ST 20A systems are very easy to operate. ST 20A-SP systems (using
SP-2A Sodr-Pen handpiece) can be quickly set up for use in standard
soldering operations. To begin operation of a ST 20A-SP system quickly,
perform the "Set-Up" and "Operation" procedures detailed on pages
7-11 and page 16 of this manual. A shaded title bar on each of these pages
highlight their location.
When performing other operations (e.g., applications requiring use of large
SMT tips), PACE recommends that the user read and fully understand all of
the "Operation" portion of this manual in order to utilize the features of this
system. ST 20A-TT and ST 20A-PS systems are shipped with an additional
manual which should be read and fully understood before operating those
systems.
For any questions regarding this Operation & Maintenance Manual, contact your
local authorized PACE distributor or contact PACE directly at:
MANUAL NUMBER 5050-0355
SYSTEM QUICK START
Telephone (301) 490-9860, Fax (301) 604-8782
PACE Incorporated
9893 Brewers Court
Laurel MD 20723-1990
REV. C
1