Software
Water hardness / capacity
On plumbed coffee machines with a constant water supply
(without anti-scale filter, optional), and coffee machines
with a water tank, the water hardness (carbonate hardness)
is set here.
With fitted filter and constant water supply.
Filter capacity is set here.
(The water filter capacity can be found in the water filter
documentation.)
Warm-up rinsing
Whether the coffee machine should rinse out the brewing
unit with hot water after heating up is set here.
Recommended setting: active.
Foamer rinsing (optional)
Automatic foamer rinsing after the last beverage with
milk components is dispensed.
yes / no
rinsing interval
The time elapsed between the last removal of a beverage
with milk in it and a foamer rinsing.
Recommended setting: 2 minutes.
operating options
The following operating options are available.
•
Warm rinse pad (active / inactive)
•
Barista pad (active / inactive)
• Second level / toggle pad (active / inactive)
•
ON / OFF button (direct / via PIN)
•
Menu pad (immediate / delayed)
Warm rinse pad
Recommendation for self-service: inactive.
Barista pad
Recommendation for self-service: inactive.
2nd Level / toggle pad
Recommendation for self-service: inactive.
34
Water hardness:
filter capacity
warm-up rinsing
foamer rinsing
rinse interval
Options
If customers serve themselves then
some functions can be switched
to inactive.
The pads will not be shown on the
ready to operate display.
User Manual WMF 1300