Handling/Transport - Etac Wheelchair Manual Manual

Table of Contents

Advertisement

2:1 Folding
-
If armrests or sideguards are mounted, they should be removed
-
Remove the rear wheels
-
Fold down the backrest by pulling upwards on the wire.
2:2 Unfolding
-
Attach the rear wheels
-
Fold up the backrest
-
Attach armrests or sideguards if required
When attaching the rear wheels, ensure that they are securely
mounted. The button in the hub should pop out completely.
2:3 Lifting the wheelchair
-
Lift by holding the push handles and the front part of the frame.
Before lifting, ensure that the push handles are securely
fastened.
2:4 Car transport
Private car/taxi: The wheelchair should be placed in the car boot.
If this is not possible, ensure that the wheelchair is placed in a seat in
such a way that it cannot roll or overturn.
If possible, the wheelchair should be secured using a safety-belt.
2:5 Securing
The wheelchair must be secured as follows. The straps must not run
through the wheels or around the seat back tubes.

2 HANDLING/TRANSPORT

4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sting

Table of Contents