Etac Wheelchair Manual Manual page 28

10 ASSEMBLY INSTRUCTIONS: ACCESSORIES
10:14 Head-reast mount*
The head-rest is adjustable in height, depth and angle.
Remove the backrest tubes by loosening the screws. Affix the headrest
and replace the backrest tubes. Slide the headrest support into place
and fasten at the required height using the screws.
(!) By turning the headrest support 180°, the attachment
can be mode even longer.
Tools: 6 mm Allen key.
10:15 Trunk-support adjustable in height and depth, swing-away*
Mount the trunk-support between the push-handle and mount on the
backrest post using the screws and washers supplied.
To swing the trunk-support to one side, simply lift and swing.
(!) The moving parts should be oiled regulary.
* Only for the Swedish Market
28