Footrest - Etac Wheelchair Manual Manual

8:1 Adjusting the footrest in height, angle and depth
Height:
Unscrew the screws on the frame tube.
Install the desired height by sliding the footrest
attachments up or down.
Tools:
Angle: The angle can be adjusted by raising/lowering the
rear attachment strap.
Depth:
The footrest can be moved forwards 4cm by turning the
attachments 1/2 a turn (A) so that the screws are in front
of the frame tube. The footrest can be moved even
further forwards by removing the base plate from its
attachments (B) and re-setting it in the desired position.
Please note that the footplate will tip forwards more
easily when it is moved forwards at (B). The rear
attachment strap can be complemented with an
attachment rod, (see 8:2).
Tools: 3 mm Allen key and 5 mm Allen key. 8 mm spanner.
8:2 Fixed rear mounting of the footrest (optional)
A rear fixing rod, adjustable in length, is available as an option for
the footrest.
- Adjust the length of the rod
- ttach the rod as illustrated
8 SETTINGS FOOTRESTS
5 mm Allen key
15
A
B