Table of Contents
Advertisement
10 ASSEMBLY INSTRUCTIONS: ACCESSORIES
10:8 Mounting the tray
The tray is made of Plexiglas and is shaped to fit around the body.
It comes in three sizes and is mounted onto the armrests.
-
Wrap the velour strap around the armrest (1) starting at the
outside and continuing ..
-
down...
-
and up the inside (2).
-
Fasten by means of the Velcro on the tray.
10:9 Trunk support adjustable in height and depth
The attachment rod is fixed to the rear of the backrest between the
push handle and the height-adjustment screw.
If height adjustable push handles are being used, the trunk support
should be mounted closest to the backrest with the push handle
attachment at the outside.
The trunk support is adjustable in height, depth and angle.
Height:
Attach the trunk support to the attachment rod
(2 screws A) at the desired height.
Depth:
Loosen the screws (A) one turn and twist the trunk
support inwards or outwards. Re-tighten the screws.
Angle:
Loosen the screw (B) which fixes the trunk support, and
twist the support to the desired position.
Re-tighten the screw.
Tools: 4 mm Allen key
10:10 Bow handle (option)
Remove the push handles from their attachment tubes. Insert the bow
handle, install at the desired height and tighten the knobs.
10:11 Foot loop
The footrest can be equipped with a foot loop if the feet need to be
held in place.
26
1
2
A
B
Advertisement
Table of Contents
