Santana PS-10 Service Manual page 337

6A-126 ENGINE REPAIR
F
G
17
18
Oil-seal installation
18
5) Using tool (G) ref. 790968 and special tool (F) ref. 790969,
19
put a new oil-seal (17) with its protection ring over cover
enclosing oil-seal (18).
6) Apply a coat of recommended sealant ref. 790962 on the
support surface of cover (18); lubricate the end (19) of
camshaft, install cover enclosing oil-seal porta-oil-seal in
cylinder head and apply specified tightening torque to fixing
nuts (20) .
Tightening torque for the nuts of cover enclosing oil-
20
seal:
0,75 Kg-m (7,5 Nm)
Check and adjustment of the valves play
NOTE:
Check valves play and adjust, as described in 6A-49
«VALVES PLAY».