Santana PS-10 Service Manual page 336

13
14
1
2
15
16
15
12
3 5
4
Rocker arms installation
1) Lubricate rocker arms housings.
2) Assemble plungers (12) in the same order they were
dismantled and keeping, initially, the same adjusting plates
(13).
Camshaft and front oil-seal installation
Camshaft installation
1) Lubricate the rolling area of supports and covers of camshaft
in cylinder head.
2) Install camshaft with hub (14) towards the front part and put
in place the five covers (15) with the numbering oriented as
seen in the drawing.
3) Install nuts (16) tightening them gradually and uniformly
till managing to get support in cylinder head of all the
covers (15).
4) Apply to nuts (16) specified tightening torque
Tightening torque for nuts of support covers of
camshaft: 1,8 Kg-m (18 Nm)
ENGINE REPAIR 6A-125