Network Parameter - UTStarcom F1000G Manual

Activate
Select this option to connect to the AP according to the connection profile.
If the connection fails, the phone will try to connect to other connection
profiles' APs. If the phone fails to connect to all these APs and the Auto
Scan function is active, the phone will try to search and connect to
another available AP (Refer to page 55 "Auto Scan")
4.5.2.3 Auto Scan
WiFi-Settings WiFi Config Auto Scan
If the Auto Scan function is active, when the phone is switched on and
fails to connect to the APs specified in "SSID & WEP KEY", the phone will
do a scan for available APs and try to connect to one of these APs
After accessing this option, select Enable or Disable to activate or
deactivate the Auto Scan function
Note: If the phone fails to connect to all the specified and scanned
APs, the phone will periodically retry AP connections

4.5.3 Network Parameter

WiFi-Settings Network Parameter
This option enables you to set network parameters:
4.5.3.1 DHCP
WiFi-Settings Network Parameter DHCP
When you highlight this option, the current setting will be displayed in the
adjacent bubble
After accessing this option, select Disable or Enable to disable or enable
DHCP
Menu
55