Wifi-Settings; Network Parameter - UTStarcom F1000 User Manual

Hide thumbs Also See for F1000:

Table of Contents

4.5 WiFi-Settings

WiFi-Settings

From this submenu, you can perform the following WiFi settings

Note: After completing WiFi settings, switch off the phone and then

switch it on, in order that the changed WiFi settings can take effect

WiFi-Settings Network Parameter

This option enables you to set network parameters:

4.5.1.1 DHCP

WiFi-Settings Network Parameter DHCP

When you highlight this option, the current setting will be displayed in the

adjacent bubble

After accessing this option, select Disable or Enable to disable or enable

DHCP

4.5.1.2 IP

WiFi-Settings Network Parameter IP

This option enables you to perform IP settings

When you highlight one of the following options, its current setting will be

displayed in the adjacent bubble

Note: Only when DHCP is disabled, can the IP option be available.

Otherwise, when you select this option, Please disable DHCP will

be displayed

Table of Contents

Do you have a question about the F1000 and is the answer not in the manual?