Getting Material To Flow - WAGNER PROCOAT MAX Owner's Manual

3. Getting
Material to
Flow
You will need:
Start
• Scrap material / cardboard
• Drop cloths to protect floors and
furnishings from overspray
note: Motor will cycle ON and OFF while
spraying to regulate pressure. This is normal.
1
(a)
1. Rotate spray tip forward to
SPRAY position (a).
Unlock the spray gun trigger.
4
MAX
4. Turn the PRIME/SPRAY
knob to SPRAY - MAxIMUM
PRESSURE.
9
2
SQUEEZE
2. Point the spray gun at a piece
of scrap material/cardboard.
Squeeze and hold trigger
for steps 3-5.
5
SPRAY
5. Continue to squeeze trigger
until the material is flowing
freely through the spray gun.
note: Motor will cycle ON and
OFF while spraying to regulate
pressure. This is normal.
3
ON
3. Turn the power ON.
6
6. Release the trigger and lock
the spray gun.
English