WAGNER PROCOAT MAX Owner's Manual page 17

5 6
5. Remove the inlet filter from 6. Thread pump cleaning
the suction tube and place
it into waste container.
9
9. Point the spray gun at the side of
a waste container.
7
7. Unclip the return tube from the suction tube
adapter onto garden hose. and place it into the waste container.
Thread suction tube fitting Turn the PRIME/SPRAY knob to PRIME.
over the adapter.
10
10. While squeezing the trigger, turn the
PRIME/SPRAY knob to SPRAY -
MINIMUM PRESSURE.
PRIME
11
11. Continue squeezing the trigger
until fluid is coming out clear.
17
8
ON
8. Turn the water supply to the garden hose on.
Turn the pump ON.
Water will go into the suction tube and out
through the return tube. Let the pump run
for a few minutes, and leave pump running
for next steps.
12
PRIME
12. Perform Pressure Relief
Procedure, page 7.
Move on the Cleaning the Spray
gun Components, page 19.
English