SYSTEM MAINTENANCE
ALARMS
The iDCS 500 is provided with software that self-checks for any failures. If a
failure does occur in the iDCS 500 software or hardware, a fault error will be
generated and buffered to an alarm report. During an alarm state every
phone with an assigned SYSTEM ALARM button will ring and cause the
SYSTEM ALARM button to flash amber. A phone with a display should be
used so that the alarm information can be viewed. When an alarm occurs,
the user can press the SYSTEM ALARM button to view and scroll through
the alarms. This will silence the audible part of the alarm, but the SYSTEM
ALARM button will continue to flash until your Service Company views and
clears the alarms in the alarm report located in the system software.
35
36