Advertisement
1. Safety Instruction
You have to carefully read the instruction, which includes
important information about the installation, operation and
maintenance.
• Please keep this User Guide for future consultation. If you sell the unit
to another user, be sure that he also receives this instruction booklet
thus giving them the necessary information about the use and general
warnings regarding the unit.
• Unpack and check carefully there is no transportation damage before
using the unit.
• Before operating, ensure that the voltage and frequency of power supply
match the power requirements of the unit as stated in this manual.
• It's important to ground the yellow/green conductor to earth in order to
avoid electric shock.
• The unit is for indoor use only. Use it only in a dry location. Exposing the
device to rain or moisture would cause the risk of electrical shock or fire.
Maximum ambient temperature is 40°C. Don't operate it in locations
where the temperature is higher than this.
• The unit must be installed in a location with adequate ventilation, at
least 15 cm from adjacent surfaces. Be sure that no ventilation slots are
blocked. The electrical work that is necessary for installation must done
by qualified personnel.
• Check the surrounding area and make sure there are no flammable
liquids, water or metal objects that could enter the fixture. If a foreign
object or substance enters the unit, immediately disconnect the mains
power.
• Disconnect the device from the mains power before any servicing or
maintenance.
• In the event of serious operating problem, stop using the unit
immediately. Never try to repair the unit by yourself. Repairs carried out
by unskilled people can lead to damage or malfunction. Please contact
the nearest authorized technical assistance centre. Always use the
same type spare parts.
• There are no user serviceable parts inside the fixture. Do not open the
housing or attempt any repairs by yourself. If the fixture shows any visible
damage or in the unlikely event, that your fixture may require service,
please contact your nearest dealer. Always use genuine spare parts.
• Do not connect the device to any dimmer pack.
• Do not look directly at the LED light beam while the fixture is on.
3
Hide quick links:
Advertisement
