LSI PCI Express to 6Gb/s Serial Attached SCSI (SAS) User Manual page 11

PCI Express to 6Gb/s Serial Attach SCSI (SAS) Host Bus Adapters User Guide
June 2012
Activity LED Header (J3). The LSISAS9210-8i HBA has a 4-pin, right-angle, 0.1-in. pitch header for driving external
activity LEDs.
Table 6 LSISAS9210-8i LED Header
UART Connector (TP1). The UART connector debug port requires a special cable and LSI support to gather detailed
IOC status.
Table 7 LSISAS9210-8i UART Pinout
3.1.2.4 Physical Characteristics
The LSISAS9210-8i HBA is a 6.6-in. × 2.7-in. low-profile board. The component height on the top and bottom of the
LSISAS9210-8i HBA is in accordance with the PCIe specifications.
Figure 3 LSISAS9210-8i Board Layout
J6: PCIe x8-lane board edge connector

J4, J5: SFF-8087 mini-SAS, internal, right-angle connectors

J3: 4-pin, right angle, 0.1-in. pitch pin header for driving external activity LEDs

TP1: UART connection

Pin
1
2
3
4
Pin
1
2
3
4
J4 J5
J6
Function
3.3 V
Port 0
Port 1
3.3 V
Function
UART0_TX
Gnd
UART0_RX
3.3 V
TP1
LSISAS2008
LSI Corporation
- 11 -
Characteristics of the LSI 6Gb/s HBAs
J3
3_00004-03
Host Bus Adapter Characteristics