Related Manuals for LSI SAS 9311-4i4e
Summary of Contents for LSI SAS 9311-4i4e
- Page 1 LSI® SAS 9311-4i4e PCI Express® to 12Gb/s Serial Attached SCSI (SAS) Host Bus Adapter User Guide Version 1.2 September 2014 DB15-001020-02...
- Page 2 800-372-2447 Avago Technologies, the A logo, LSI, Storage by LSI, and Fusion-MPT are trademarks of Avago Technologies in the United States and other countries. All other brand and product names may be trademarks of their respective companies. Data subject to change. Copyright © 2013 - 2014 Avago Technologies. All Rights Reserved.
-
Page 3: Table Of Contents
LSI® SAS 9311-4i4e PCI Express® to 12Gb/s Serial Attached SCSI (SAS) Host Bus Adapter User Guide ...... -
Page 4: Lsi Sas 9311-4I4E Pci Express To 12Gb/S Serial Attached Scsi (Sas) Host Bus Adapter User Guide
The low-profile design of the SAS HBA includes a full-height bracket and low-profile mounting bracket that create a universal fit for any server.The LSI 12Gb/s SAS HBA is based on the Fusion-MPT™-architected LSI SAS 3008 controller that integrates the latest enhancements in PCIe 3.0 technology and 12Gb/s SAS technology. -
Page 5: Sas-3 Interface
Memory The LSI 12Gb/s SAS HBA provides one 4-M × 16-bit Flash ROM to store the firmware and the BIOS. The LSI 12Gb/s SAS HBA can provide up to 32 K × 8-bit NVSRAM for storing nonvolatile RAID information when a system failure occurs or to reflash the board to run IR firmware. -
Page 6: Connectors
Physical Characteristics The LSI 12Gb/s SAS HBA is a 6.0-in. × 2.7-in., low-profile board. The component height on the top and bottom of the LSI 12Gb/s SAS HBA is in accordance with the PCIe specification. The following figure shows the HBA board layout. -
Page 7: Thermal And Atmospheric Limits
LSI 12Gb/s SAS HBA Certifications and Safety Characteristics All LSI 12Gb/s SAS HBAs meet or exceed the requirements of UL flammability rating 94V-0. Each bare board is marked with the supplier’s name or trademark, type, and UL flammability rating. Because these boards are installed in a PCIe bus slot, all voltages are less than the SELV 42.4-V limit. - Page 8 Connect internal SAS cables between the HBA and the SAS backplane, any other SATA or SAS devices in the system chassis, or both. The LSI 12Gb/s SAS HBA has one SFF-8643, internal x4, mini-SAS HD connector. Use a cable with an internal mini-SAS HD connector on one end (to connect to the HBA) and the appropriate connector to attach to the SAS or SATA devices or the backplane on the other end.
-
Page 9: Technical Support
LSI SAS 9311-4i4e PCI Express to 12Gb/s SAS Host Bus Adapter User Guide Technical Support September 2014 Technical Support For assistance installing, configuring, or running the LSI 12Gb/s SAS HBA, contact LSI Technical Support: E-mail: globalsupport.pdl@avagotech.com Phone: 1-800-633-4545 (North America) -
Page 10: Revision History
LSI SAS 9311-4i4e PCI Express to 12Gb/s SAS Host Bus Adapter User Guide Technical SupportRevision History September 2014 Revision History Version 1.2, September 2014 The following document changes were made. Added Active Cable Management Support section. Updated URL references.
Need help?
Do you have a question about the SAS 9311-4i4e and is the answer not in the manual?
Questions and answers