Advanced Settings - Mio MiVue 5 series User Manual

Item
G-Sensor
Sensitivity
System
Format

Advanced settings

The System option in the Settings Menu porvides the advanced settings for the system.
ƒ GPS Status: Displays the status of GPS signal reception.
ƒ Date/Time: Sets the system date and time. For more information, see the "Setting the
date and time" section.
ƒ Beep Alert: Enables or disables system notification sounds.
ƒ Volume: Adjusts the volume level.
ƒ LCD Standby: Select Always On or select how long (10 sec, 1 min, or 3 min) the screen
remains lit after you press any key.
ƒ Language: Sets the language.
ƒ Distance Unit: Sets the preferred distance unit.
ƒ Storage Allocation: The system provides four default memory configurations to store
Description
- EV: Sets the proper exposure level (-1 ~ +1) to adjust the brightness of the
image. The default setting is 0.
- HDR: Select On or Off to enable or disable High Dynamic Range function of
the device.
- GPS Stamp: Sets if and how you want to record the GPS information.
When enabled, the G sensor will prompt the recorder to start recording
automatically if an event happens.
Select Emergency or Parking Mode, and then change the sensitivity level of the
G sensor.
Please note that it is harder to trigger when you set the sensitivity level lower.
Allows you to change the system settings of the device.
For more information, see the "Advanced settings" section.
Formats a memory card. (All data will be erased.)
15