Table of Contents
Advertisement
Wireless Router
RNX-N4
Hardware Installation
1. Place the unit in an appropriate place after conducting a site survey.
2. Plug one end of the Ethernet cable into the LAN port of the device and another end into your
PC/Notebook.
3. Plug one end of another Ethernet cable to WAN port of the device and the other end into you
cable/DSL modem (Internet)
4. Insert the DC-inlet of the power adapter into the port labeled "DC-IN" and the other end into
the power socket on the wall.
Ethernet
PC
WLAN Router
AC/DC cable
Power Outlet
4
Cable/DSL
Ethernet
Modem
Quick Installation Guide
Advertisement
Table of Contents
