Table of Contents
Advertisement
Wireless Router
RNX-N4
Logging In
1. To configure the device through the web-browser, enter the IP address of the device
(default: 192.168.1.2) into the address bar of the web-browser and press Enter.
2. After connecting to the IP address, the web-browser will display the login page.
Select Admin from the drop-down list and then leave the password field blank.
Click on the Log In button to continue.
Internet Connection Wizard
1. Click on the Internet Connection Setup Wizard button to begin the process.
2. The Wizard requires that you configure the password, time zone, and Internet (WAN) connection.
Click on the Next button to continue.
3. By default, the device does not use a password. Specify a password for administrator access to
the device, then type the password once more in the Verify Password field.
Click on the Next button to continue.
4. Select your time zone from the drop-down list Click on the Next button to continue.
5. The next step in the wizard is the Internet Connection, select the WAN connection type from the
list, and then click on the Next button to continue with the wizard.
6
Quick Installation Guide
Advertisement
Table of Contents
