Package Contents; Installation Environment Requirements; Connecting The Router; System Requirements - Rosewill RNX-N150RT Quick Installation Manual

Hide thumbs Also See for RNX-N150RT:

Table of Contents

1. Package Contents

The following items should be found in your package:

RNX-N150RT 150Mbps Wireless Lite N Router

Power Adapter for RNX-N150RT 150Mbps Wireless Lite N Router

Quick Installation Guide

Resource CD for RNX-N150RT 150Mbps Wireless Lite N Router, including:

This Guide

Other Helpful Information

Note:

Make sure that the package contains the above items. If any of the listed items are

damaged or missing, please contact with your distributor.

Broadband Internet Access Service (DSL/Cable/Ethernet)

One DSL/Cable Modem that has an RJ45 connector (which is not necessary if

the Router is connected directly to the Ethernet.)

PCs with a working Ethernet Adapter and an Ethernet cable with RJ45

connectors

TCP/IP protocol on each PC with no conflict

Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari

Place the Router in a well ventilated place far from any heater or heating vent

Avoid direct irradiation of any strong light (such as sunlight)

Keep at least 2 inches (5 cm) of clear space around the Router

Operating Temperature: 0℃~40℃ (32℉~104℉)

Operating Humidity: 10%~90%RH, Non-condensing

2.3 Connecting the Router

Before installing the Router, make sure your PC is connected to the Internet through

the broadband service successfully. If there is any problem, please contact your ISP.

After that, please install the Router according to the following steps. Don't forget to

pull out the power plug and keep your hands dry.

Table of Contents