Table of Contents
Advertisement
Wireless Router
RNX-N4
IP Address Configuration
The default IP address of the device is 192.168.1.2 In order to log into this device, you must first
configure the TCP/IP settings of your PC/Notebook.
1. In the control panel, double click Network Connections and then double click on the connection
of your Network Interface Card (NIC). You will then see the following screen.
2. Select Internet Protocol (TCP/IP) and then click on the Properties button. This will allow you to
configure the TCP/IP settings of your PC/Notebook.
3. Select Use the following IP Address radio button and then enter the IP address (192.168.1.21)
and subnet mask (255.255.255.0). Ensure that the IP address and subnet mask are on the same
subnet as the device.
4. Click on the OK button to close this window, and once again to close LAN properties window.
5
Quick Installation Guide
Advertisement
Table of Contents
