Table of Contents
Advertisement
Wireless
RouterRNX-N400LX
Power
1.5 Network + System Requirements
To begin using the RNX-N400LX, make sure you meet the following as minimum
requirements:
PC/Notebook.
Operating System that supports Web Browsers
Microsoft Windows
Mac OS
Linux
1 Free Ethernet port on your PC/NB
WiFi card/USB dongle (802.11b/g/n) – optional.
External xDSL (ADSL) or Cable modem with an Ethernet port (RJ-45).
Web-Browser (Internet Explorer, Safari, Firefox, Opera etc.)
Ethernet compatible CAT5 cables.
1.6 RNX-N400LX Placement
RNX-N400LX is suggested to place on a flat surface, or you can mount it on a wall.
However, for optimal performance, place your RNX-N400LX in the center of your office
(or your home) that is away from any potential source of interference, such as a metal
wall, microwave oven, and 2.4GHz cordless phone. If the antennas are not positioned
correctly, performance loss may occur.
1.7 Hardware Setup
Place the RNX-N400LX to the best optimum transmission location. The best
transmission location for your RNX-N400LX is usually at the geographic
center of your wireless network, with line of sign to all of your mobile stations.
Connect RNX-N400LX to your wired network. Connect the Ethernet WAN
interface of RNX-N400LX by category 5 Ethernet cable to your switch/ hub/
xDSL modem or cable modem. A straight-through Ethernet cable with
appropriate cable length is needed.
The power jack allows an external DC power supply
connection.
10
User Manual
Advertisement
Table of Contents
