Manual Network Setup - Rosewill RNX-N4 Quick Installation Manual

Wireless Router RNX-N4

Manual Network Setup

1. If you select the Manual option, then you will be required to specify the SSID and select the
appropriate network security.
2. Click on the Next button to continue. The wireless wizard will inform you that there are three
major steps in the process. name your wireless network, secure your wireless network and set
your wireless security password
3. Click on the Next button to continue.
4. Specify the Wireless Network Name (SSID) for the device.
5. Click on the Next button to continue.
6. This step requires that you configure the security features based on your needs.
The following options are available.
a. BEST – Select this option if your wireless adapters support WPA2
b. BETTER – Select this option if your wireless adapters support WPA
c. GOOD – Select this option if your wireless adapters do not support WPA, but supports
WEP instead
d. None: Select this option if you do not want to activate any security features.
7. Select a level of security and then click on the Next button to continue.
8. If you do not want to setup security, then select the NONE radio button.
12
Quick Installation Guide