Download Print this page

Travis Industries Avalon Ashpan Installation Instructions Manual page 3

Advertisement

Avalon Ashpan Installation Instructions
4
Seal the area around the knock-out for outside air on standard pedestals (the 2" x 7" forward center
knockout - see the illustration below) with stove gasket cement (knead the cement inside the tube
prior to applying). Smooth the cement so it is flush with the baseplate. Seal the area around the
drop chute in the same manner.
5
For the Rainier (990), follow step 5a. For the Olympic (1190), follow step 5b.
5 a
This kit includes four bricks. Locate the 6" x 2-1/8" and 2-7/8" x 8-1/4" bricks, they are used for the
Rainier (990). The other two bricks may be discarded. Use the bricks inside the firebox, along with
the two bricks for the Rainier (990), to form the brick pattern shown below (NOTE: you will have
two extra bricks - these bricks may be discarded).
Standard Rainier (990) Floor Brick Pattern
B
Page 3 of 7
Seal the gap around the
bottom of the drop chute
F
A
F
F
C
B
D (included with ashpan pedestal)
E (included with ashpan pedestal)
Seal the gap around
Do not seal this
Ashpan Pedestal Rainier (990) Floor Brick Pattern
F
B r i c k
A
B
C
F
this knock-out
knock-out.
F
A
D
E
C
B
S i z e
9" x 1-5/8"
9" x 3-15/16"
1-3/4" x 3-15/16"
6" x 2-1/8"
2-7/8" x 8-1/4"
Full (9" x 4-1/2")
Printed September 4, 2008
Part # 99200125
F
F

Advertisement

loading