Utility Tool
–
Status
When you click
–
Add Port
When you select the printer on the list and press this button, a port
is added.
–
Port Number
Input the port you create with TCP/IP.
–
To perform the setup manually, click [Manual setup].
–
Device Name (DNS Name)
Specify a printer name on the network.
–
IP Address
Specify an IP address of the printer.
–
Hardware Address
Specify a MAC address of the printer.
–
Port Number
Specify a port number of the port you create.
–
Print Server Name
Specify a print server name of the printer on the IPX/SPX network.
–
Network Address
Specify a network address of the printer on the IPX/SPX network.
–
Add Port
Create a port with the specified details.
6
Confirm the details of the setup on the setup screen. If it is OK, close
the setup screen by clicking the close box on the upper right of the win-
dow.
7
Click [OK] to close properties window of printer driver.
Note
The bizhub PRO 1050 Series is not corresponding to the IPX/SPX-P2P.
bizhub PRO 1050/1050e/1050P/1050eP
, the printer on the network is searched.
15
15-25