Per Page Setting - Konica Minolta Bizhub Pro 1050 User Manual

PCL Printer Driver Setting (Windows)
Chapter - Page Number
For the PCL printer driver, print a specific page so that it comes on the front,
when printing on [Duplex] or [Booklet].
Multiple page numbers can be entered. When entering multiple page num-
bers, use commas to separate them as in the following example: [2,4,6]. A
range can be specified with a hyphen as in the following example: [6-10].
The [Chapter] cannot be set in the following cases:
- The [Single Side] is selected in the [Setup] tab - [Print Type].
- When any item other than [Z-Fold] is selected in [Special Functions] tab
- [Fold].

Per Page Setting

Sets the specified pages to change [Print Type], [Paper Source], [Staple]
and/or [Hole-Punch] settings and to use Tab Paper.
Per Page Setting - List Name
Each Per Page Setting can be saved as a list.
Selects the list name from the list.
bizhub PRO 1050/1050e/1050P/1050eP
Regular duplex printing
A specified page
Duplex printing when edited by chapter function.
If a page specified as an opening page of a
chapter comes to a back side, insert a blank
page to shift the location of the specified page
to the front side of the next paper.
The example is long-side folded, but duplex printing can
also be done with short-side folded documents.
Page 1 is printed
This is the front side
A specified page
Regular pamphlet printing.
Example: page 4 is the opening
page of a chapter function.
Pamphlet printing when edited
by chapter.
If a page specified as an opening
page of a chapter does not come
to the front side, a blank page is
inserted, and the specified page
will slide to the front side of the
next paper.
8
8-35