ViTiny UM06 User Manual page 9

inquires to adjust LED brightness and exposure value +/-. The image
brightness will change as the LED brightness and exposure value
changed.
(2-5) SHARPNESS：On/Off the sharpness. [ON/OFF]。
 [ON] the image is sharp.
 [OFF]the image is less-sharp, but more smooth.
(2-6) STATUS BAR：Show or not show the status bar on the screen top. please
refer to Section 1.2.3-(9).
 [ON] show the status bar on the top of screen.
 [OFF]close the status bar show on the screen.
(2-7) OBJECT LENS：Object lens type. (4x or 10x) When change another lens,
the setting needs to reset. Refer to Section 1.5.
 [4X] Object Lens 4x, turn on LED for lens 4x; in opposite, turn off LED
for lens 10x.
 [10X]Object Lens 10x, turn off LED for lens 4x; in opposite, turn on LED
for lens 10x.
(2-8) LCD SIZE：Screen size. The current setting is only for 7"~80".
(2-9) FACTORY：All setting return to factory setting.
 [NO]the current setting.
 [YES]return to factory setting.
：choose last item
(3) Up
：choose next item
(4) Down
：choose next value
(5) Left
：choose last value
(6) Right
(7) Exposure Value: 13 levels of exposure value is selectable, from +0.2~-2.0.
(7-1) Increase
(7-2) Decrease
：when the image is darker, add exposure value.
：when the image is brighter, decrease exposure value.
7