program to tuning to clear image.
(2) Fixed image sensor position
(2-1) In HDMI mode, the status bar will show on the screen, please refer to
Section 1.2.3-(9). Use remote controller to adjust image sensor position
based on magnification size, FOV, or distance height.
(2-2) In PC CAM mode, choose required height or FOV from drop down list on
application program (see below fig).
When image sensor position is fixed, as (2-1) and (2-2), use knob ○
find clear image. Adjust the knob ○
height, then slightly adjust the knob ○
○
j
○
k
in the beginning to the appropriate
j
to find clear image.
k
15
& ○
j
k
○
j
○
k
to