Operating Instructions - Accu-Scope 3078-HDR Manual

Operating Instructions

NOTE: When connected to a monitor, the camera is operated using the remote control. When using the
remote, be sure to point the remote at the microscope head where the camera is located.
®
ACCU-SCOPE
3078-HDR ZOOM STEREO MICROSCOPE
Power On/Off
The camera is powered on when you turn on the
microscope – to power on, press the (I) button on the
(I/O) toggle switch on the base of the microscope.
Navigation Bar Interface
When the microscope/camera is turned on, the first
screen/interface is the real-time interface. From this
interface, you can adjust the EV (Exposure Value) by
using  and  on the remote, take photos and record
video.
To HIDE the navigation bar along the bottom of the
screen, press OK on the remote. To SHOW the
navigation bar, press OK again.
Menu Introduction
Press the MENU button on the remote to enter the
operating mode.
You can use the  and  to navigate through the choices
on the screen. When a choice is selected it will appear
brighter.
Select SYSTEM SETTING by pressing the OK button to
enter the system setting options. You can choose and
change various settings here such as Language,
Contrast, EV, Auto Power Off, etc.
NOTE: Any time you want to return to the previous
menu, Press the MENU button on the remote.
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
12