Table of Contents
Advertisement
DCS-660 User's Manual
Monitor Program (continued)
The Admin Privilege
In the monitor tool system, the admin privilege has the right to access the DCS-6620 PTZ Internet Camera
through this application software and change the local settings as well. But the admin privilege is not the
same as the admin privilege as the PTZ Internet Camera. You can change the settings of each selected
PTZ Internet Camera in the remote site only if you have the admin privilege of the PTZ Internet Camera.
If you have the admin privilege, you have the right to do the following items:
Again, if you need to change the settings of the DCS-6620, you must have the password of the admin
user.
Camera Configurations
When you log in for the first time, you should configure this application software to connect the DCS-6620
in "Configuration Menu > Camera Configurations", shown in the figure below. You will need the admin
(administrator) privilege in order to run the configuration.
Once you click "Configuration Menu > Camera Configurations" for setting each camera, all recording
processes will be stopped with a warning window popped up in advance to keep you informed.
D-Link Systems, Inc.
Run the configuration tool
Change the recording schedule
Change the local settings
Using IP surveillance Software
78
Advertisement
Table of Contents
